Amana Tool 45 Degree Laminate Miter Joint Under-Cut Assembly Router Bits Option:55314 - 1-3/8 Dia x 1/4 x 1/2 Inch Shank Combines two-steps into one by

Combines two-steps into one by simultaneously grinding and polishing

four of the most common shapes for door and window trim

The high-performance SPEED-TIP™ design self-feeds for faster hole making when compared to traditional spade bits

No tooling is required

Amana Tool 45 Degree Laminate Miter Joint Under-Cut Assembly Router Bits Option:55314 - 1-3/8 Dia x 1/4 x 1/2 Inch Shank Combines two-steps into one byEliminate that dark line at the edge of a counter or other laminate covered surface. With this bit assembly, the laminate cemented to the substrate can be trimmed and mitered in one pass. Then a pre mitered edging strip can be applied. The resulting seam is clean and crisp. Not intended for use in a laminate trimmer. a. Laminated top is 'under cut', as shown. b. Apron laminate is pre cut at 45. c. Adhere pre cut laminate for a perfect fit. A fine file